We are adding our gunsmithing services to this page. We can do anything and are not limited to this list. We currently have sixteen pages of gunsmithing services, and will be adding more information to this list as time permits.
Starting price means that due to unforseen circumstances, prices may be higher.
Though we make every effort to keep prices on this list current, prices involving parts provided by other companies, or proprietary services may change based on market conditions.i.e. Hogue Wood Grips, Magnaporting, Robar NP3 Plating.
Prices are subject to change without notice.
Clean Lube and Inspect Long Guns
| Description |
Starting Price |
| Single Shot simple action Savage, Nef etc. |
$75.00 |
| Single Shot high grade Ruger #1, Dakota Arms |
$90.00 |
| Bolt Action standard grade |
$85.00 |
| Bolt Action high grade |
$95.00 |
| Pumps & Levers standard grade Rem 870, Win 1300etc, Win 94, Mar33 |
$75.00 |
| Pumps & Levers high grade Win 1897, 12s, Rem10, Bro BLR |
$95.00 |
| Semi Auto standard Rem 1100/11/87, m1 car, Rug 10/22 |
$75.00 |
| Semi Auto complex A-5, BAR, etc. |
$95.00 |
| Side by Side & Over and Under standard grade |
$105.00 |
| Side by Side & Over and Under high grade |
$165.00 |
Clean Lube Inspect Handguns
| Description |
Starting Price |
| Handguns most models |
$75.00 |
| Handguns complex models |
$95.00 |
Clean Lube Inspect Extras
| Description |
Starting Price |
| Heavily Leaded or Badly Fouled Barrels |
$10.00- $20.00 |
| Test Fire ammo extra |
$10.00 |
Laser Engraving
| Description |
Starting Price |
| AR Receiver Magazine Well |
$85.00 and up |
| AR Dust Cover per side |
$20.00 |
| Custom Artwork |
quoted by the hour based on complexity |
Scope Mounting Long Guns
All scope mountings include degreasing scope tube, mounts screws, rings & holes in firearms. Loctite @ bases, rings and screws. Bore Sighting.
| Description |
Starting Price |
| Factory Drilled and Tapped |
$45.00 |
| Talley rings Factory Drilled and Tapped |
$65.00 |
| Redrill 6-48 to 8-40 and Install |
$100.00 |
| Drill & Tap Top Mount and Install |
$95.00 |
| Drill & Tap Epoxy Top Mount and Install Rem 1100 and other thin receivers |
$105.00 |
| Drill & Tap Side Mount |
$100.00 |
Scope Mounting Hand Guns
All scope mountings include degreasing scope tube, mounts screws, rings & holes in firearms. Loctite @ bases, rings and screws. Bore Sighting.
| Description |
Starting Price |
| Factory Drilled and Tapped |
$45.00 |
| Drill & Tap up to four holes |
$95.00 |
| Drill & Tap Dust Cover Frame Style up to ten holes |
$135.00 |
| Drill & Tap frame style mount 1 hole |
$45.00 |
| Stainless Steel, Nickel, or Chrome |
Add $10.00 |
Scope Mounting Extras
| Description |
Starting Price |
| Ream and Polish Inside Of Ringsremoves stress on scope by aligning rings and machining them on the gun, limited availibility due to ring design. |
$55.00 |
| Bore SightIncluded in installation price. |
$20.00 |
| Fire SightAvailable at distance of 25, 50, 100 yards (does not include ammo and targets) |
$85.00 |
SightWork- Long Gun Sight Installation Front
| Description |
Starting Price |
| Ramp Style Screw On Drill and Tap |
$55.00 |
| Ramp Style Solder On Blueing Extra |
$85.00 |
| Ramp Barrel Band Style Blueing Extra |
$125.00-185.00 |
| Dovetail Front Sight |
$45.00 |
| Dovetail Cot For front sights |
$85.00 |
SightWork- Long Gun Sight Installation Rear
| Description |
Starting Price |
| Adjustable Ramp Style Drill and Tap |
$75.00 |
| Adjustable Ramp Solder On |
$85.00 |
| Express Sight Drill,Tap and Fit Base |
$75.00 |
| Receiver Sight Drill and Tap |
$85.00 |
| Receiver Sight No Drill and Tap |
$45.00 |
SightWork- Long Gun Sight Installation Sets
| Description |
Starting Price |
| Front and Rear Drill and Tap |
$100.00 |
| Front and Rear Drill Rear, Cut Dovetail Front |
$110.00 |
| Front and Rear No Drilling and Tapping |
$45.00 |
| Front and Rear Precut Dovetail |
$45.00 |
| Front and Rear Solder On |
$150.00 |
SightWork- Shotgun Bead Installation
| Description |
Starting Price |
| Front Bead Barrel Mount No Drill and Tap |
$45.00 |
| Front Bead Barrel Mount Drill and Tap |
$55.00 |
| Front Bead Rib Mount No Drill and Tap |
$30.00 |
| Front Bead Rib Mount Drill and Tap |
$45.00 |
| Rear Bead Rib Mount Only No Drill and Tap |
$30.00 |
| Rear Bead Rib Mount Drill and Tap |
$45.00 |
| Combo Front and Rear Rib Only Drill and Tap |
$80.00 |
| Combo Front and Rear Rib Only |
$45.00 |
SightWork- Handgun Sight Installation-Front
| Description |
Starting Price |
| XS Sight Systems J Frame Revolver Mill front sight down to stud, mill grooves in stud, and epoxy sight on. |
$85.00 |
Handgun Sight Installation Front Stake on Front |
$55.00 |
| Handgun Sight Installation Front Blade Replacement (replaceable models)No Machining |
$35.00 |
| Handgun Sight Installation Front Sight Insert Plastic |
$55.00 |
| Handgun Sight Installation Front Clark Style Dovetail |
$85.00 |
| Handgun Sight Installation Front Dual Crimp Millet |
$55.00 |
| Handgun Sight Installation Front Dovetail Cut Round Barrel |
$85.00 |
| Handgun Sight Installation Front Dovetail Cut Round Slide |
$65.00 |
| Handgun Sight Installation Front Insert Cut in Sight and Insert |
$55.00 |
SightWork- Handgun Sight Installation-Rear
| Description |
Starting Price |
| Replacement Pre Cut No Machining |
$45.00 |
| Smith and Wesson Revolver Style Cut(J frame cut) |
$150.00 |
| Millet Custom Combat Low Profile Cut |
$185.00 |
| Bo-Mar Low Profile Cut |
$135.00 |
| Bo-Mar Low ProfilePocket StyleCut |
$165.00 |
| Novak Low profile Cut |
$165.00 |
SightWork- Handgun Sight Installation-Sets
| Description |
Starting Price |
| Replacement Pre Cut No Machining |
$45.00 |
| Smith and Wesson Revolver Style Cut(J frame cut)rear, Dovetail Front |
$175.00 |
| Millet Custom Combat Low Profile Rear, Dual Crimp or Dovetail |
$225.00 |
| Bo-Mar Low Profile Rear, Dovetail Front |
$190.00 |
| Novak Low profile Rear, Dovetail Front |
$190.00 |
Trigger Work-Long Guns
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| AR-15 Style Tune Factory Parts W/Frame Mods |
$150.00 |
| AR-15 Style Tune Jewel Parts Set |
$125.00 |
| Benellis |
$125.00 |
| Beretta 390 |
$125.00 |
| Browning A Bolt |
$125.00 |
| CVA Mag Hunter Bolt |
$125.00 |
| Knight Revolution Tune Trigger and Refit Safety |
$125.00 |
| Marlin 22 Rifles |
$125.00 |
| Marlin Bolt Actions Center Fire |
$125.00 |
| Ithaca 37/87 |
$125.00 |
| New England Firearms Single Shot |
$125.00 |
| Marlin Lever Action |
$125.00 |
| Mossberg 500 |
$125.00 |
| Over & Under Rifle and Shotgun Box Locks |
$200.00 |
| Remington 700 & similar |
$125.00 |
| Remington 870/1100/11-87/Browning BAR |
$125.00 |
| Ruger 10/22 |
$125.00 |
| Ruger 10/22 with Overtravel Stop |
$150.00 |
| Ruger #1& CZ |
$150.00 |
| Ruger 77/22 & 77 MK II |
$125.00 |
| Ruger 77/22 & 77 MK II Over Travel Stop |
$150.00 |
| Ruger Mini 14/30 |
$160.00 |
| Ruger Mini 14/30 With Over Travel Stop |
$175.00 |
| Sako Bolt Action |
$125.00 |
| Savage 110 & Similar |
$125.00 |
| Savage Rimfire |
$125.00-$150.00 |
| Side By Sides Rifle and Shotgun Box Locks |
$250.00 |
| Side Locks SS/OU Rifles & Shotguns |
$250.00 |
| Smith and Wesson 1500 |
$125.00 |
| T/C Encore, Omega |
$125.00 |
| Weatherby Vanguard |
$125.00 |
| Weatherby MKIV |
$125.00 |
| Winchester 70 |
$125.00 |
| Winchester 88 |
$165.00 |
Trigger Work-Hand Guns Single Action Revolvers
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Colt Adjust Trigger to 2.5-5lbs |
$180.00 |
| Colt Adjust Trigger Pull to 5.5 lbs or more |
$150.00 |
| Freedom Arms |
$150.00 |
| Ruger 2.5-5 lbs |
$145.00 |
| Ruger 5.5 or more lbs |
$124.00 |
| Ruger Super Tune |
$170.00 |
Trigger Work-Hand Guns Double Action Revolvers
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Ruger |
$150.00 |
| Ruger Lower Double Action Pull Weight* |
$185.00 |
| Smith and Wesson |
$150.00 |
| Smith and Wesson Lower Double Pull Weight* |
$185.00 |
*May Need Spring Kit **Extra**
Trigger Work-Hand Guns Single Action Semi-Autos
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Browning Buckmark |
$125.00 |
| Hi-Power 4-4.5lbs Sear Lever & Springs Included |
$185.00 |
| 1911 Style Series 70/80 4.5-5 lbs Carry |
$125.00 |
| 1911 Style Series 80 3.5 lbs to 4.4lbs Target Requires Upgraded Parts Not For 10mm |
$145.00 |
| 1911 Style Series 70 3.5 lbs to 4.4lbs Target Requires Upgraded Parts |
$140.00 |
| High Standard Most Models |
$125.00 |
| Ruger MK II |
$125.00 |
| Ruger MK II with Take Up Travel Adjustment |
$145.00 |
| Ruger 22/45 |
$125.00 |
| Ruger MKIII Standard Trigger Work |
$125.00 |
| Ruger MK III Advanced Trigger Work Remove take up travel and adjust safety |
$150.00 |
| Smith & Wesson 422 series 22 LR Pistol |
$125.00 |
Trigger Work-Hand Guns Double Action Semi-Autos
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Beretta* |
$125.00 |
| Glock Reduced Smoother Pull (Includes Parts) |
$125.00 |
| Glock Ultimate New Aluminum Trigger, Connector, Titanium Firing Pin, Labor, Test Fire, Test Ammo |
$300.00 |
| Kahr Reduced, Smoother Trigger Pull |
$125.00 |
| S&W* |
$125.00 |
Savage Striker |
$125.00 |
| Siq Sauer* |
$125.00 |
| Note Most Semi Auto Pistols Require New Spring Kits |
$20.00-$40.00 |
*May Need Spring Kit **Extra**
Trigger Work-Hand Guns Double Action Semi-Autos
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Single Shot XP100, TC Contender |
$125.00 |
| TC Encore |
$135.00 |
Ruger 22 Pistol Majestic Arms Kit
| Description |
Starting Price |
| Majestic Arms Kit Part Only |
$75.00 |
| Majestic Arms Kit Installation |
$65.00 |
| Majestic Arms Kit Installation + Clean Lube and Inspect |
$85.00 |
Handgun Work-1911 Style Top End Work-Slide & Up
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Barrel Fitting Drop In (Link Test) |
$45.00 |
| Barrel Fitting Non-Ramp Standard |
$65.00 |
| Barrel Fitting Non-Ramp Match Grade |
$90.00 |
| Barrel Fitting Ramped Barrel |
$150.00 |
| Barrel Fitting Ramped Barrel (ER) Extended Ramp For Hollow Point |
$200.00 |
| Barrel Fitting Compensator & Barrel Non-Ramped |
$135.00 |
| Barrel Fitting Compensator & Barrel Ramped |
$195.00 |
| Barrel Bushing Fitting |
$40.00 |
| Barrel Bushing Fitting (Match Grade, turn barrel, fit bushing) |
$60.00 |
| Cocking Serrations Front of Slide |
$150.00 |
| De-Burr Slide |
$50.00 |
| Disconnect Deepen Disconnect in Slide |
$45.00 |
| Ejection Port Open and Lower |
$55.00 |
| Ejection Port Open, Lower & Flare Back |
$85.00 |
| Ejection Port Flare Back Only |
$45.00 |
| Extractor Fitting |
$45.00 |
| Feeding Throat Barrel and Frame |
$85.00 |
| Feeding Smooth Breach Face |
$45.00 |
| Recoil Spring Guide Rod |
$45.00 |
| Recoil Spring Plug Reverse Plug Installation |
$45.00 |
| Serrations on Rear of Slide |
$85.00 |
| Porting Through Slide and Barrel |
$130.00 |
| Porting-Disassembly Charge |
$20.00 |
| Porting Round Trip Shipping |
Actual Market Cost |
Handgun Work-1911 Style Bottom End Work-Frame
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Checkering 30 LPI Front Strap |
$185.00-$200.00 |
| Checkering 30 LPI Trigger Guard |
$85.00 |
| Checkering 30 LPI Main Spring Housing |
$85.00 |
| Checkering 30 LPI Back Strap & Main Housing |
$85.00 |
| Checkering 30 LPI Small Parts |
$45.00 |
| Stippling Front Strap |
$125.00 |
| Stippling Trigger Guard |
$45.00 |
| Stippling Main Spring Housing |
$55.00 |
| Stippling Back Strap & Main Housing |
$85.00 |
| Stippling Small Parts |
$45.00 |
| Ejector Install Extended Ejector and Tune (Ammo Not Included) |
$45.00 |
| Grip Safety No Frame Modifications |
$45.00 |
| Grip Safety Frame Modifications (Blueing Extra) |
$95.00 |
| Hammer Installation |
$45.00 |
| Magazine Catch/Release |
$20.00-$35.00 |
| Magazine Well Funeling |
$85.00 |
| Magazine Well Installation and Funneling S&A Type (blueing not included) |
$100.00 |
| Recoil Spring Guide Without Frame Modifications |
$35.00 |
| Recoil Spring Guide With Frame Modifications |
$55.00 |
| Plunger Tube Installed Holes Flared Tubes Staked |
$30.00 |
| Sear Installation |
$45.00 |
| Slide Release Installation |
$45.00 |
| Thumb Safety Ambidextrous |
$75.00 |
| Thumb Safety Standard |
$55.00 |
| Trigger Installation |
$45.00 |
| Throat Barrel and Frame |
$85.00 |
Handgun Work-Revolver- Barrel Work
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Shorten Factory Barrel Crown, New Sight |
$175.00 |
| Fit New Barrel Factory Replacement Only-Labor Only |
$85.00 |
| Fit Custom Barrel Shank Thread Etc |
$150.00 |
| Barrel Set Back Repair Eroded Throat or Excessive Cylinder Gap |
$90.00 |
| Throat Recutting Forcing Cone |
$55.00 |
| Round Butt Conversion Blueing and Plating Extra |
$125.00 |
Handgun Work-Revolver- Cylinder
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Alignment Correction |
$45.00-$65.00 |
| Chamfer Mouth of Cylinder for Speed Loading |
$50.00-$60.00 |
| Crane Alignment |
$45.00 |
| Crane Lock Single |
$55.00 |
| Crane Lock Double |
$65.00 |
| Crane Stretching |
$45.00 |
| Inspection |
$45.00 |
| Oversized Cylinder Pin |
$145.00 |
| Polishing |
$50.00-$60.00 |
| Timing Correction |
$45.00-$85.00 |
Handgun Work-Revolver- Other
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Hammer Spur Remove Hammer Spur and Shape |
$50.00 |
Handgun Work-Revolver- Stippling
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Back Strap Small Frame |
$85.00 |
| Back Strap Large Frame |
$95.00 |
| Fore Strap Small Frame |
$85.00 |
| Fore Strap Large Frame |
$95.00 |
| Trigger Guard Front |
$55.00 |
Barrel Fitting Action Work-Long Gun-Custom Barrel
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Lap Bolt Lugs |
$85.00 |
| Bolt Face Trued and Polished |
$60.00 |
| Action Face Trued |
$60.00 |
| Install Customer's Barrel Blank, Shank, Chamber, Crown |
$200.00 |
| Lug Seat Trued |
$60.00 |
| Lug Trued |
$60.00 |
| Barrel Removal and Installation |
$85.00 |
| Reset Headspace Remove Barrel, Machine Install |
$125.00 |
| Reset Headspace Remove Barrel, Top Dead Center |
$145.00 |
| Reset Headspace M1 Garand |
$125.00 |
| Test Head Space |
$45.00 |
| Muzzle Break Installation Thread and Fit (AR Style) |
$135.00 |
| Muzzle Break Installation Thread and Fit Bolt Action |
$170.00 |
| Muzzle Break Installation Thread and Fit TDC (top dead center) |
$205.00 |
| Muzzle Break Installation Pre Threaded |
$45.00 |
| Muzzle Break Installation Pre Threaded TDC (top dead center) |
$85.00 |
| New Barrel Break In 20 rnds ammo not included (2 hrs) |
$100.00 |
Barrel Fitting Action Work-Long Gun-Crowning Center Fire
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Crown Barrel Relieve Crown Only- Chamfer |
$45.00 |
| Crown Barrel New Installation |
$60.00 |
| Crown Barrel Removed From Action |
$100.00 |
| Crown Barrel Cut to Length |
$110.00 |
| Crown Barrel Remove barrel, Crown, Install barrel |
$110.00 |
Barrel Fitting Action Work-Long Gun-Extractors and Feed Ramps
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Extractor Installation Custom Sako |
$150.00 |
| Extractor Installation |
$55.00 |
| Polish Feed Ramp |
$65.00 |
| Polish Feed Ramp Fit Mag well |
$75.00 |
Barrel Fitting Action Work-Long Gun- Safety Installations
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Three Position Precise Metal Smithing Type |
$150.00 |
| Two Position Buehler Style for M98/96/93 |
$60.00 |
Barrel Fitting Action Work-Long Gun-Bolt and Bolt Handles
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Forging Bolt Handles Shape and Inlet Stock |
$160.00 |
| Sniper Knob Installation |
$85.00 |
| Taper Pin Installation AR Style |
$40.00 |
| Re-build Bolst Assemble and Tune |
$65.00 |
| Fluting Bolt Handle |
$150.00 |
Shotgun Work-Chokes
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Alterations Soft Metal Barrels |
$85.00 |
| Alterations Hard Metal Barrels |
$90.00 |
| Alterations Chrome Lined Barrels |
$95.00 |
Shotgun Work-Forcing Cone
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Alterations Soft Metal Barrels |
$85.00 |
| Alterations Hard Metal Barrels |
$90.00 |
| Alterations Chrome Lined Barrels |
$95.00 |
| Patterning Adjust Point Of Impact |
$85.00 and Up |
Shotgun Work-Bead Installation
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Front bead Barrel Mount |
$45.00 |
| Front Bead Vent Rib Mount |
$45.00 |
| Rear Bead Vent Rib Mount |
$45.00 |
| Combo Front & Rear Rib Mount Only |
$75.00 |
Shotgun Work- Recoil Pad Installation
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Wood Stock Standard Pad |
$85.00 |
| Wood Stock Limb Saver |
$85.00 |
| Synthetic Stock |
$85.00- $150.00 |
Shotgun Work- Safety Conversions
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Ithaca |
$45.00 |
| Remington Machine Trigger Guard |
$85.00 |
| Winchester 1200, 1300 |
$45.00 |
Shotgun Work- Shorten and Crown Barrell
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Shorten and Crown Barrel Single Shot Plain Install Bead |
$85.00 |
| Shorten and Crown Barrel Single Shot Vent Rib Install Bead |
$85.00 |
| Shorten Barrel & Crown Double Barrel Install Bead |
$85.00 |
Shotgun Work- Miscellaneous
Labor Charges Only and Start at the Following Rates
| Description |
Starting Price |
| Trigger Work Ithaca 37/88 |
$90.00 |
| Trigger Work Remington 870, 1100, 11/87 |
$90.00 |
| Shell Latch Timing and Adjustment |
$45.00 |
Custom Ruger SP 101
Custom Profile and Meld
| Description |
Starting Price |
| SP101, SW 60 & Other Small Frame |
$250.00 |
| GP100, SW 686, 66 & Other |
$250.00 |
| Finishes- Matte finish is standard, Brush (factory style) or High polish, High polish add $100 complete gun |
$275.00 |
Custom Options
| Description |
Starting Price |
| Higher Luster Parts (note:not all parts in the stainless steel firearms are stainless. Some parts left in the white or can be nickel plated.) |
$50.00 |
| Mag Na Port 2 Ports Shipping Charges Extra |
$100.00 |
| 4 Ports 3" Barrel (dual trapezoidal) |
$140.00 |
| Chamfer Cylinders |
$45.00 -$54.00 |
| Trigger Work |
$85.00-$125.00 |
| Super Tune Complete Action |
$150.00-$250.00 |
| Adjustable sights (SP 101 Adj Rear Hi Visibility Front) |
$205.00 |
| Hogue Wood Grips (Goncalo Alves, Pau Ferro, Lamo Camo, Rosewood Laminate, Kingwood, Tulipwood, Coca Bolo, Rosewood) |
$79.99 to $104.99 |
| Hogue Rubber Grips |
$27.99 |
Custom Packages
| Description |
Starting Price |
| Basic Hogue Rubber Grips Meld Firearms, Matte Finish Frame, Cylinder & Small Parts, Chamfer Cylinders, Tune Trigger |
$379.95 |
| Basic Hogue Wood Grips Meld Firearms, Matte Finish Frame, Cylinder & Small Parts, Chamfer Cylinders, Tune Trigger |
$449.95 |
| Advanced Hogue Rubber Grips Meld Firearms, Matte Finish Frame, Cylinder, High Polish Small Parts, Adjustable Rear Sights |
$649.99 |
| Advanced Hogue Wood Grips Meld Firearms, Matte Finish Frame, Cylinder, High Polish Small Parts, Adjustable Rear Sights |
$699.99 |
| Deluxe Package Hogue Rubber Grips Meld Firearms, Matte Finish Frame,Cylinder, High Polish Small Parts, Adjustable Rear Sights High Visibility Front Sight, Super Tune Action, Chamfer Cylinder. Mag Na Port Barrel |
849.95 |
| Deluxe Package Hogue Wood Grips Meld Firearms, Matte Finish Frame,Cylinder, High Polish Small Parts, Adjustable Rear Sights High Visibility Front Sight, Super Tune Action, Chamfer Cylinder. Mag Na Port Barrel |
899.99 |
| Please Note: all wood for grips are not always available, please have a second choice of wood if you choose wood grips. |
|
Ruger MK II: Barrel Lightening and Contouring
| Description |
Starting Price |
| Flute Style |
$$150.00 |
| Vent Style |
$150.00 |
Ruger MK II: Other Labor
| Description |
Starting Price |
| Tune Trigger (with take up travel) |
$105.00 |
| Tune Trigger |
$95.00 |
| Stipple front of grip frame |
$85.00 |
| Customize safety bevel top and bottom |
$45.00 |
| Customize slide release Extend Out |
$30.00 |
| Gold Plate grip screws, trigger pin, trigger slide release, safety & sight screw |
$125.00 |
| Modify Frame (mill flats on top edge of frame to remove sharp edge) |
$25.00 |
| Crown Barrel |
$65.00 |
| Reblue Barrel and frame high polish bolt |
$135.00 |
| Jewel Bolt $45.00 |
|
| Polish and Lap Action |
$50.00 |
Ruger MK II: Custom Trigger
| Description |
Starting Price |
| Clark Style |
|
| Volquartesn Trigger |
|
Ruger MK II: Custom Grips
Package Guns
| Description |
Starting Price |
| Turn Barrel, Bevel Receiver, Crown Barrel, Tune Trigger With Tack Up& Over Travel Adjustments, Stipple Front of Grip, Customize And Refit Safety, Customize Slide Release, Gold Plate Package, Modify Frame, Reblue To Medium Luster, High Polish Bolt. Polish and Lap Action, Rosewood or King Wood Checkered Grips with Thumb Rest |
$899.99 |
Custom Glock Options
| Description |
Starting Price |
| Np3 Plate Slide, Slide Stop Lever, Slide Lock, Block Pin Trigger Pin |
$175.00 |
| 3.5 lb Connector |
$22.00 |
| Titanium Firing Pin |
$80.00 |
| Aluminum Trigger |
$109.00 |
| New Firing Pin Liner |
$3.00 |
Custom Glock Stipling
| Description |
Starting Price |
| Thumb Groove/Rest 2 sides |
$29.99 |
| Touch Pads 2 sides |
$19.99 |
| Panels 2 |
$89.99 |
| Panels 4 |
$134.99 |
| Full Rap |
$169.99 |
| Full Rap High Patterm |
$189.99 |
| Remove Finger Groves |
44.99 |
Custom Ruger Single Action and Other Similar Models: Frame Modifications
| Description |
Starting Price |
| Tune Action Frame and Grip Frame, Remove Burrs Left Over From Manufacturing Process From Action and Grip Frame. Stone and Smooth Inside of Frame, Polish Ejector Rod Hole |
$100.00 |
Custom Ruger Single Action and Other Similar Models: Cylinder
| Description |
Starting Price |
| Polish Cylinder Stop Notches |
$30.00 |
| Polish Cylinder Chambers, Polish Chamber Throats |
$60.00 |
| Chamfer Chamber Mouth |
$54.00 |
| Inspect Cylinder Alignment |
$25.00 |
| Adjust Cylinder Alignment Per Cylinder |
By The Hour |
| Fit Over Sized Cylinder Pin to Cylinder and Frame |
$100.00 |
Custom Ruger Single Action and Other Similar Models: Ejector and Housing
| Description |
Starting Price |
| Correct Fit of Ejector Housing, Correct Length Of Retaining Screw, Radius End of Ejector Housing, Polish Inside of Ejector Housing, Re-cut Ejector rod head to Clear Barrel, Radius Head and Remove Burrs, Polish Shaft |
$65.00 |
Custom Ruger Single Action and Other Similar Models: Barrel
| Description |
Starting Price |
| Inspect forcing cone, barrel face & cylinder barrel gap |
$20.00 |
| Re-cut forcing cone |
$35.00 |
| Re-cut barrel face |
$30.00 |
Custom Ruger Single Action and Other Similar Models: Tune Trigger
| Description |
Starting Price |
| Ruger 2.5-5lbs |
$85.00 |
| Super Tune Trigger |
$150.00 |
Custom Ruger Single Action and Other Similar Models: Finishes
| Description |
Starting Price |
| Matte finish firearm |
$100.00 |
| Matte finish firearm and hi polish small parts |
$150.00 |
Custom Ruger Single Action and Other Similar Models: Custom Single Action Packages
| Description |
Starting Price |
| Basic Remove Burrs From Firearm, Matte Finish Frame and Cylinder and Small Parts, Chamfer Cylinder, and Tune Trigger |
$239.99 |
| Advanced Remove Burrs From Firearm, Matte Finish Frame and Cylinder and Small Parts, High Polish Small Parts, Chamfer Cylinder, Tune Trigger, Re-cut Forcing Cone and Barrel Face |
$345.00 |
| Deluxe Package Super Tune Action & Grip Frame, Matte Finish Frame and Cylinder, High Polish Small Parts, Super Tune Cylinder, Super Tune Action, Mag Na Port, Furnish and Install Over Size Cylinder Pin, Super Tune Ejector and Elector Housing |
$650.00 |
Stock Work: Glass bedding
| Description |
Starting Price |
| Glass Bed and Free Float Barrel Seal Wood |
$200.00 |
| Glass Bed and Pressure Point Barrel Seal Wood |
$250.00 |
| Glass Bed and Screw Pillars. Free Float Seal Wood |
$250.00 |
| Pressure Point Barrel Seal Wood |
$85.00 |
| Free Float Barrel (Seal Barrel Channel) Seal Wood |
$85.00 |
Stock Work: Recoil Pad Installations: Includes Cutting Stock To Length and Sealing End Grain
| Description |
Starting Price |
| Recoil Pad Installation Wood Stock |
$85.00 |
| Limbsaver Recoil Pad Installation Wood Stock |
$85.00 |
| Recoil Pad Installation on a Synthetic Stock Starts at |
$85.00 to $150.00 |
| Interchangeable Recoil Pad System Fit one pad 2 stock bushings |
$120.00 |
| Spacers Installed with the installation of the pad |
$20.00 |
| Adjustable Pad Hardware & Pad Installation |
$85.00 |
Stock Work: Stippling
| Description |
Starting Price |
| Stipple Simple Pattern on pistol grip |
$125.00 |
| Stipple Simple pattern on forend |
$175.00 |
| Stipple Complicated pattern on pistol grip |
$150.00 |
| Stipple Complicated pattern on forend |
$200.00 |
Stock Work: Stock Fitting
| Description |
Starting Price |
| All Stock Fitting Is Billed By The Hour |
$85.00 Per Hour |
Stock Work: Recheckering
| Description |
Starting Price |
| Recheckering Existing Panels Starting price per set. |
$200.00 |
Metal Finishing Blueing
Please Note: All firearms to be blued must be clean. If your firearm needs to be cleaned there will be an additional charge.
Pre-Polished Firearms (Firearms must be completely disassembled, cleaned, de-greased, polished, cleaned again, oiled within 2 minutes of final polish and cleaning, each part must be itemized and listed on paper, and each part must be wrapped or bagged) PARTS RETURNED DISASSEMBLED PARTS WILL TURN OUT AS GOOD AS THEY ARE POLISHED. NOT RESPONSIBLE FOR DEFECTS IN THE FINISH.
| Description |
Starting Price |
| Parts From Only One Firearm |
$150.00 |
| Barrel Only |
$85.00 |
| Economy Finish (Firearms disassembled, polished to 140 grit finish, small parts may be matte finished.) No Pits Removed |
|
| Long Guns (most) |
$150.00 |
| Handguns (most) |
$120.00 |
| Removing Pits |
$65.00 First Hour $40.00 each addtional hour |
Metal Finishing Blueing: Long Guns
Most Models
| Description |
Starting Price |
| Matte Finish |
$250.00 |
| Medium Finish (400 grit, Better than most factory finishes) |
$350.00 |
| High Luster (Similar to a Weatherby Finish) |
$450.00 |
| High Luster Mirror |
650.00 |
| Octagon Bbls Add for Hi |
$100.00 |
| Octagon Bbls Add for Hi Luster |
$200.00 |
Metal Finishing Blueing: HandGuns
Most Models
| Description |
Starting Price |
| Matte Finish |
$200.00 |
| Medium Finish (400 grit, Better than most factory finishes) |
$250.00 |
| High Luster (Similar to a Weatherby Finish) |
$450.00 |
| High Luster Mirror |
550.00 |
Metal Finishing Blueing: Muzzle Loaders
Round Barrels
| Description |
Starting Price |
| Matte Finish |
150.00 |
| Medium Finish (400 grit, Better than most factory finishes) |
$200.00 |
| High Luster (Similar to a Weatherby Finish) |
$250.00 |
| High Luster Mirror |
350.00 |
Metal Finishing Blueing: Muzzle Loaders
Octagon Barrels
| Description |
Starting Price |
| Matte Finish |
200.00 |
| Medium Finish (400 grit, Better than most factory finishes) |
$250.00 |
| High Luster (Similar to a Weatherby Finish) |
$325.00 |
| High Luster Mirror |
500.00 |
Metal Finishing Blueing: Muzzle Loaders
Octagon Barrels
| Description |
Starting Price |
| Matte Finish |
200.00 |
| Medium Finish (400 grit, Better than most factory finishes) |
$250.00 |
| High Luster (Similar to a Weatherby Finish) |
$325.00 |
| High Luster Mirror |
$500.00 |
Metal Finishing: Other Finishes
NP3 Finish Nickel Teflon Silver Gray ColorCan be applied to Steel Stainless Steel, Aluminum And Many Other Alloys. Cleaning is Minimal. No Lubrication Needed on Opposing Surfaces. NP3 Has a Hardness of 48-51 Rockwell. Even Coating On All Surfaces. Very Corrosion Resistant.
Rogard Finish Black ColorPolymer Based Finish. The Most Corrosion Resistant and Hardest Black Finish.
Please Note: Robar Will Not Polish Your Firearm. You must Have All Surface Defects Repaired First
| Description |
Starting Price |
| NP3, Rogaurd or Two Tone: Hand Guns |
$265.00 |
| NP3, Rogaurd or Two Tone: Long Guns |
$300.00 |
Metal Finishing: Gold Plating
| Description |
Starting Price |
| Gold Plating Small Parts: Hand Guns |
$100.000 |
| Each Additional Part |
$40.00 |
| Gold Plating: Large Parts |
Market Price |
| Gold Plating: Complete Handgun |
Market Price |
| Gold Plating Long Guns Small Parts |
$100.00 |
| Gold Plating Medium Size Parts Receivers |
Market Price |
| Gold Plating Large Parts Barrels |
Market Price |
| Complete Long Gun |
Market Price |